The Shop HSV upcoming events

Introduction to Woodworking: Build Your Own Step Stool (June 13, 2026)

Sat, 13 Jun 2026 15:00:00 GMT

Introduction to Woodworking: Build Your Own Step Stool

Ready to roll up your sleeves and get hands-on with woodworking? In this beginner-friendly class, you'll learn the fundamentals of working with wood while building a sturdy, stylish step stool you can take home and use with pride.

What You’ll Learn:

How to safely use essential woodworking tools (saws, drills, sanders, clamps)
Measuring, cutting, and assembling wood with precision
Basic joinery techniques and finishing methods
Tips for staining and sealing or painting your project. We won't be applying any finish at The Shop.

What You’ll Make: A classic wooden step stool—perfect for reaching high shelves, helping little ones brush their teeth, or just showing off your craftsmanship.

‍Who It’s For: No experience? No problem. This class is designed for total beginners or anyone looking to brush up on their skills in a relaxed, supportive environment.

Leave With: A finished step stool, new skills, and the confidence to tackle your next DIY project.

So, if you’re ready to step up your woodworking skills, sign up today!

About Your Instructor: John Buckman is an accomplished woodworker and builder. He is the "Shop Foreman" and not only can use each tool in the woodworking area of The Shop but also maintains them. He's been doing woodworking for over 40 years and will assist members and answer their questions whenever they run into problems with a project.

** Classes are transferable up to 48 hours before class, but not refundable.

North Alabama Wood Crafters Free Demo and Meeting (June 13, 2026)

Sat, 13 Jun 2026 15:30:00 GMT

North Alabama Wood Crafters Free Demo and Meeting

This Month's Free Demonstration: How to Sharpen Lathe Tools

A Hands‑On Woodworking Demonstration

Unlock smoother cuts and better control at the lathe with this skill‑boosting sharpening demonstration. Learn how to grind, hone, and maintain gouges, skews, scrapers, and parting tools for crisp, clean performance. You’ll see proper bevel angles, safe grinder technique, and the simple motions that keep tools razor‑sharp and ready for any turning project. A must‑see for beginners looking to build confidence and a valuable refresher for experienced turners.

About Your Instructor: Bob Hovde is an accomplished woodturner/woodcrafter with over 20 years of experience turning wood. Bob is a member of the American Association of Woodturners and is the Past aPresident of the North Alablama Woodcrafters.

The North Alabama Wood Crafters (NAWC) organization is a collection of committed woodworkers who produce everything from furniture to instruments. The group has monthly meetings and travels to local craft fairs to demonstrate various facets of woodworking, such as woodturning, carving, and marquetry.

One of NAWC’s goals, in addition to sharing the beauty of woodcraft with others, is to provide a forum and network for woodcrafters to develop their woodworking knowledge and skills.eir woodworking knowledge and skills.

Silk Screen Printing T-Shirt or Hoodie Class (Family Friendly) (June 13, 2026)

Sat, 13 Jun 2026 16:00:00 GMT

Silk Screen Printing T-Shirt or Hoodie ClaSs

Family Friendly (Ages 14+)

Discover the art of silk screen printing in this hands-on workshop. You'll learn the fundamentals of screen printing while creating your choice of your own custom T-shirt or hoodie. This class is perfect for beginners and those looking to enhance their skills. Students should have some idea of the design they’d like to screen print. At a minimum it should be at least a hand drawing or for a digital design, please bring it on a flash drive.

What You’ll Learn:

Screen mesh, mesh count, the effects of mesh count on your project
How to choose a screen based on your project
Preparing your design on the computer using Corel Draw or Photoshop
Prepare the screen Coating and burning image
How to prep art for a screen
Setting up the screen printing station
Applying ink and printing your design
Curing and finishing your T-shirt or hoodie
Learn to clean up and reclaim screens

Class includes all materials including the T-shirt or hoodie.

** Classes are transferable up to 48 hours before class, but not refundable.

Wooden Bowl Turning Introduction: Turn a Cedar Nut or Salad Bowl (June 13, 2026)

Sat, 13 Jun 2026 16:30:00 GMT

Beginning Woodturning: Turn a Cedar Nut or Salad Bowl

Woodturning is one of the most satisfying ways to shape wood, and this beginner‑friendly class gives new turners the perfect first project: a beautifully simple cedar nut or salad bowl. With its rich aroma, warm color, and smooth cutting characteristics, cedar makes an ideal introduction to the lathe.

In this hands‑on class, students learn the fundamentals of safe, confident woodturning while creating a functional bowl from start to finish. You’ll explore the essential techniques that form the foundation of all turning work, including:

Lathe setup — understanding speed, tool rest position, and workholding
Tool control — using gouges and scrapers to shape clean curves
Bowl shaping — forming the outside profile and hollowing the interior
Sanding and finishing — creating a smooth, food‑safe surface
Safety practices — smart habits that build confidence at the lathe

Students will work step‑by‑step with guidance, learning how to read the grain, control the cut, and shape a bowl that feels good in the hand and looks beautiful on the table. The project is approachable for complete beginners, yet satisfying enough that returning turners enjoy refining their technique.

By the end of the class, each participant will leave with:

A hand‑turned cedar nut or salad bowl
A solid understanding of woodturning basics
The confidence to take on future turning projects

This class is a welcoming introduction to the world of woodturning — a chance to learn new skills, enjoy the scent and beauty of cedar, and create a piece you’ll be proud to use or give as a gift.

About your Instructor: Bob Hovde is an accomplished woodturner/woodcrafter with over 20 years of experience turning wood. Bob is a member of the American Association of Woodturners and is the Past aPresident of the North Alablama Woodcrafters.

Basic Blacksmithing Level 1 (June 16, 2026)

Tue, 16 Jun 2026 22:30:00 GMT

Basic Blacksmithing Level 1

Step into the world of blacksmithing and forge your first creation in this hands-on introductory course! Designed for beginners, this class covers the fundamental principles, essential techniques, and must-have tools of blacksmithing. Students will learn how to properly heat, shape, and manipulate metal using traditional methods, gaining confidence in the craft along the way.

Under expert guidance, each participant will complete a functional take-home item, such as a basic J hook or spike hook—perfect for displaying their newfound skills. Whether you're exploring a new hobby or laying the groundwork for future forging projects, this course is an excellent first step into the artistry and practicality of blacksmithing.

No prior experience is necessary—just bring enthusiasm and a willingness to hammer out something amazing!

Note: This course is a prerequisite for our more advanced Blacksmithing courses.

Important Note: Please wear closed-toed shoes (not open-toed shoes) preferably leather. Please wear clothing made of natural fiber with long pants and long sleeves for protection. Protective gear will be provided as will an Anvil, Forge, Vices, and Tool Sets.

About your Instructor: Dewey Mason is a master welder, blacksmith and fabricator. He teaches, fabricates metal art, and does artistic blacksmithing at his own Fire Giants Forge. Dewey has done most everything when it comes to metalworking, from making plate armor to underwater welding. He’s taught many beginners the basics of welding and fabrication.

** Classes are transferable up to 48 hours before class, but not refundable.

Welding 101 Class (June 18, 2026)

Thu, 18 Jun 2026 22:30:00 GMT

Welding 101

Level 1 This is a basic introduction to home welding and processes. Utilizing a MIG welder, you will create a welded steel box from precut parts. At the end of the class, you will have a steel box to take home.

Material Selection and Preparation – Different thicknesses of materials and how to prepare them for welding.
MIG Welder Basics – How a MIG welder works with gas and without gas. The advantages and disadvantages of each method.
Joining Techniques – How to weld a proper bead and join your pieces together.
Finishing and Cleaning Your Work – Methods for cleaning up your welds post welding

Important Note: Please wear closed-toed shoes (not open-toed shoes) preferably leather. Please wear clothing made of natural fiber with long pants and long sleeves for protection. Protective gear will be provided.

NOTE: This class is a prerequisite for the other welding and metalworking classes we offer.

** Classes are transferable up to 48 hours before class, but not refundable.

Wooden Pen Turning Class (Family Friendly) (June 20, 2026)

Sat, 20 Jun 2026 15:00:00 GMT

Wooden Pen Turning Class

Learn a little, smile a lot. Join the experts for two hours of pen making. You learn the entire process from selecting wood to assembling the pen.

You get hands on tutoring while you make your very own uniquely handcrafted pen.

By the end of the session, you will leave with your own unique handcrafted wooden pen.

What You’ll Do:

Choose your wood
Choose your metal finish
Cut it on the bandsaw
Drill it out on the drill press
Learn lathe safety and operation
Cut, sand and finishing the wood
Assemble the pen

What You'll Need:

Willingness to try something new
No loose clothes or hair
Close toed shoes

** Classes are transferable up to 48 hours before class, but not refundable.

Toddler's Rocking Chair Build!: Intro Woodworking (June 20, 2026)

Sat, 20 Jun 2026 15:00:00 GMT

Intro Woodworking: Build a Toddler's Rocking Chair!

Course Overview In this hands-on woodworking class, students will craft a sturdy toddler-sized rocking chair designed to withstand years of use and playful wear. Guided step-by-step, participants will learn essential woodworking techniques while assembling a functional and timeless piece of furniture.

What You’ll Do

Cut chair components: Shape parts using the bandsaw and router table, with many pieces pre-cut to save time and reduce repetitive cutting.
Drill and fasten: Use the drill, screw gun, and air stapler to securely assemble the chair frame.
Smooth and finish: Refine surfaces with the sander for a professional, child-safe finish.
Final assembly: Put all the pieces together to create a rocking chair that’s both durable and charming.

Skills You’ll Gain

Safe operation of common woodworking tools
Precision cutting and shaping techniques
Assembly methods for strong, lasting furniture
Sanding for smooth, polished results You can paint or apply the finish of your choice at home.

Takeaway: By the end of the class, each student will proudly take home a toddler-sized rocking chair—built with their own hands —that’s ready for years of rocking, reading, and play.

Note: There will be a half hour lunch break.

Edge Grain Cutting Board - Part 1 (June 20, 2026)

Sat, 20 Jun 2026 15:00:00 GMT

Create Your Own Edge Grain Cutting Board

Embark on a hands-on journey to craft your very own edge grain cutting board! This class is perfect for woodwork enthusiasts, whether you're a beginner or have some experience under your tool belt.

What You’ll Learn:

Safety Practices: Learn essential safety tips to keep your woodworking experience enjoyable and accident-free.
Learn to distinguish end grain from edge grain: There’s a difference.
Wood Selection: Discover the best types of wood for cutting boards and why edge grain is a durable choice.
Gluing Techniques: Explore different gluing methods to ensure your board is sturdy and long-lasting.
Smoothing and Sanding: Master the art of planing and sanding wood to achieve smooth, even surfaces.
Edge Finishing: Optionally use the router table to round or chamfer the edges of your creation.
Finishing Touches: Apply food-safe finishes to protect your board and enhance its natural beauty.

What You’ll Make:

By the end of the class, you'll have a stunning, custom edge grain cutting board to take home. Each board is not only a practical kitchen tool but also a unique piece of art you can be proud of.

Note: While not a bladeless class, the strips to make the cutting boards will be precut to various widths in order to maximize design and glue up time.

This is a two session class, please reserve a Part II class to complete your cutting board:

Part I 10:00 AM to 1:00 PM Saturday
Part II 1:00 PM to 4:00 PM Sunday - the next day (free)

Part II 10:00 AM to 1:00PM the following Saturday (free)

About your Instructor: Phil Kern been an avid woodworker all his life and enjoys solving problems and making everything from garden obelisks to bluebird houses. He worked backstage at many theatre companies in Huntsville building sets and set pieces as well as many home projects. He has 2 daughters who among their many other talents also share his passion for working with wood.

** Classes are transferable up to 48 hours before class, but not refundable.

Stained Glass: Dimensional Sun Catcher (June 20, 2026)

Sat, 20 Jun 2026 15:00:00 GMT

Stained Glass: Dimensional Sun Catcher

Celebrate the charm of handcrafted art with this vibrant dimensional sun catcher! This is a project for intermediate stained glass enthusiasts, No beginners, please. The central, free hanging crystal creates splashes of rainbows as sunlight travels through it. A variety of transparent glasses will be available- but if you have a special color in mind, let us know in advance.s

This class is perfect for an intermediate stained glass student.

Note: Please cover up – no shorts, open toed shoes or sandals!

About your Instructor: Karen Reed is an accomplished glass artist who’s been working professionally in the medium since 1981. At her studio, Earthstar Glass, she creates fused glass, painted glass, and stained glass pieces with many of her works combining all three methods (although she’ll tell you there are many more than just three!). Her creations have been exhibited and offered through galleries across the US. It’s been requested by the White House and now sits in the archival collection. Her glass has been accepted at shows curated by past directors of the Smithsonian Institution and Pilchuk Glass. She’s been featured and published in many books and magazines and her fused glass series “Sunscapes” was shown on CBS TV’s “Sunday Morning with Charles Osgood”. She has taught at the John C. Campbell Folk School, Arrowmont School of the Arts and Crafts, The Appalachian Center for Crafts, Bullseye Glass, Uroboros Glass, Hollander Glass, and Weiser Glass. She has also taught specialty classes for Art Museums, Botanical Gardens, Clubs, Guilds and Design Centers. She’s also taught classes at Burritt on the Mountain Folk School and creates custom designs for homes, businesses, and galleries. We consider ourselves fortunate to be able to tap into her many talents!

** Classes are transferable up to 48 hours before class, but not refundable.

Pen Turning 202 (June 20, 2026)

Sat, 20 Jun 2026 15:00:00 GMT

Pen Turning 202

An excellent opportunity to improve upon the skills you learned in the basic Pen Turning Class. This session allows you to make two additional pens and more if time permits. Hone and polish your skill (and pens) in this hands on semi-independent session.

Added pen kits beyond two will incur an added charge.

Prerequisite: Basic Pen Turning Class

** Classes are transferable up to 48 hours before class, but not refundable.

Wooden Pen Turning Class (Family Friendly) (June 20, 2026)

Sat, 20 Jun 2026 18:00:00 GMT

Wooden Pen Turning Class

Learn a little, smile a lot. Join the experts for two hours of pen making. You learn the entire process from selecting wood to assembling the pen.

You get hands on tutoring while you make your very own uniquely handcrafted pen.

By the end of the session, you will leave with your own unique handcrafted wooden pen.

What You’ll Do:

Choose your wood
Choose your metal finish
Cut it on the bandsaw
Drill it out on the drill press
Learn lathe safety and operation
Cut, sand and finishing the wood
Assemble the pen

What You'll Need:

Willingness to try something new
No loose clothes or hair
Close toed shoes

** Classes are transferable up to 48 hours before class, but not refundable.

Pen Turning 202 (June 20, 2026)

Sat, 20 Jun 2026 18:00:00 GMT

Pen Turning 202

Added pen kits beyond two will incur an added charge.

Prerequisite: Basic Pen Turning Class

** Classes are transferable up to 48 hours before class, but not refundable.

Edge Grain Cutting Board - Part 2 (June 21, 2026)

Sun, 21 Jun 2026 18:00:00 GMT

Create Your Own Edge Grain Cutting Board

After completing the steps in part I if the class, you will finish your cutting board and prepare it for use at home. This class is included with your purchase of the Part I class.

What You’ll Learn:

In Part II

Smoothing and Sanding: Master the art of planing and sanding wood to achieve smooth, even surfaces.
Edge Finishing: Optionally use the router table to round or chamfer the edges of your creation.
Finishing Touches: Apply food-safe finishes to protect your board and enhance its natural beauty.

This is a two session class, Part I class is required.

** Classes are transferable up to 48 hours before class, but not refundable.

Basic Blacksmithing Level 2 (June 23, 2026)

Tue, 23 Jun 2026 22:30:00 GMT

Basic Blacksmithing Level 2

Take your blacksmithing skills to the next level by crafting intricate, organic forms from solid bar stock. Build on your skills forged in Blacksmithing Level 1 to create one piece forged flowers.

In this next level course, students will learn advanced forging techniques to shape tulips and lilies using heat, hammer, and anvil—no welding or additional materials required. Emphasis will be placed on controlled tapering, upsetting, and detailed petal shaping to create lifelike flowers entirely from one piece of metal.

By the end of the course, students will walk away with beautifully forged floral sculptures and the knowledge to apply similar techniques to other decorative metalwork.

Ready to turn steel into art? Let’s fire up the forge and get started.

Prerequisite: Blacksmithing Level 1

** Classes are transferable up to 48 hours before class, but not refundable.

Knifemaking 101 - From Spike to Steel Knife (June 24, 2026)

Wed, 24 Jun 2026 22:30:00 GMT

Knifemaking 101 - From Spike to Steel Knife‑Making Class

Join us for an exciting blacksmithing experience where you’ll turn a genuine railroad spike into a handcrafted knife. This beginner‑friendly class teaches the fundamentals of forging hot steel using traditional tools and techniques. No prior experience is required — just curiosity and a willingness to learn.

What You’ll Learn

Heating and shaping steel in a forge
Drawing out, tapering, and forming the blade
Creating bevels and refining the knife profile
Basic heat‑treating: hardening
Finishing, sharpening, and adding personal touches

What You’ll Take Home

A fully forged railroad‑spike knife — a unique, functional piece you crafted with your own hands.

All tools, materials, and safety gear are provided. Space is limited, so reserve your spot early.

** Classes are transferable up to 48 hours before class, but not refundable.

Welding 102: Essential Skills for Home Projects (June 25, 2026)

Thu, 25 Jun 2026 22:30:00 GMT

Welding 102: Essential Skills for Home Projects

Prerequisite: Welding 101

Take your welding skills to the next level with Welding 102, a hands-on course designed to introduce fundamental techniques for cutting, prepping, and welding small home projects. Whether you're looking to tackle DIY repairs, build functional metalwork, or enhance your craftsmanship, this class provides the skills you need to get started.

What You’ll Learn:

Metal Cutting & Preparation – Learn proper methods for measuring, marking, and cutting metal for clean, precise results.
Basic Welding Techniques – Develop foundational welding skills with MIG or stick welding, focusing on strong, durable welds.
Safety & Equipment Use – Gain confidence in handling welding tools while maintaining essential safety practices.
Project-Based Learning – Apply your skills by working on small home projects such as brackets, simple frames, or decorative metal pieces.

With expert instruction and guided practice, you'll leave with a solid understanding of welding basics and the ability to confidently begin small-scale welding projects at home.

** Classes are transferable up to 48 hours before class, but not refundable.

Edge Grain Cutting Board - Part 2 (June 27, 2026)

Sat, 27 Jun 2026 15:00:00 GMT

Create Your Own Edge Grain Cutting Board

After completing the steps in part I if the class, you will finish your cutting board and prepare it for use at home. This class is included with your purchase of the Part I class.

What You’ll Learn:

In Part II

Smoothing and Sanding: Master the art of planing and sanding wood to achieve smooth, even surfaces.
Edge Finishing: Optionally use the router table to round or chamfer the edges of your creation.
Finishing Touches: Apply food-safe finishes to protect your board and enhance its natural beauty.

This is a two session class, Part I class is required.

** Classes are transferable up to 48 hours before class, but not refundable.

Machine Sewing Workshop 2: Crafting a Zippered Pouch (June 27, 2026)

Sat, 27 Jun 2026 15:00:00 GMT

Machine Sewing Workshop 2: Crafting a Zippered Pouch

Prerequisite: Machine Sewing Introduction: A Beginner's Workshop

Unlock a new level of machine sewing mastery in this hands-on sewing class! Designed for those who have taken our Machine Sewing Introduction Class, this workshop focuses on the techniques needed to create a fully lined, zippered pouch—a versatile project perfect for organizing small items, crafting gifts, or showcasing your creativity.

What You'll Learn:

Precision cutting and fabric preparation for structured sewing
Advanced stitching techniques to achieve professional-quality seams
Installing a zipper with a clean, polished finish
Proper lining methods for durability and visual appeal
Finishing touches, including topstitching and edge reinforcement

Whether you’re refining your craftsmanship or adding zipper installations to your skill set, this class provides expert guidance, step-by-step demonstrations, and individualized support. By the end of the session, you’ll leave with a beautifully constructed zippered pouch and the confidence to tackle future complex sewing projects.

About Your Instructor: Alicia Renata is the founder and owner of Bodacious Countess. She is a multi-talented fabric and jewelry artist who creates clothing, jewelry and leather wearables for everyday fantasy, performance art, festivals and cosplay. She enjoys sewing, crochet, and jewelry creation as well as riding her motorcycle.

** Classes are transferable up to 48 hours before class, but not refundable.

Wooden Pen Turning Class (Family Friendly) (July 25, 2026)

Sat, 25 Jul 2026 15:00:00 GMT

Wooden Pen Turning Class

Learn a little, smile a lot. Join the experts for two hours of pen making. You learn the entire process from selecting wood to assembling the pen.

You get hands on tutoring while you make your very own uniquely handcrafted pen.

By the end of the session, you will leave with your own unique handcrafted wooden pen.

What You’ll Do:

Choose your wood
Choose your metal finish
Cut it on the bandsaw
Drill it out on the drill press
Learn lathe safety and operation
Cut, sand and finishing the wood
Assemble the pen

What You'll Need:

Willingness to try something new
No loose clothes or hair
Close toed shoes

** Classes are transferable up to 48 hours before class, but not refundable.